Makita DVC260 Manuel D'instruction page 6

Adjusting belts
The tightness of the shoulder belts, upper and lower
belts can be adjusted. Put your arms through the shoul-
der belts first then fasten the upper and lower belts.
To tighten, pull the end of the strap as illustrated. To
loosen, pull up the end of the fastener.
Shoulder belts
► 1. Strap 2. Fastener
Upper belt
► 1. Strap 2. Fastener
Lower belt
1
► 1. Strap 2. Fastener
Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
1
2
2
1
2
► 1. Carrying hook
Extension wand
For vacuum cleaner type only
The length of the wand can be adjusted. Loosen the
ring on the wand and adjust the wand length. Tighten
the ring at your desired length.
► 1. Ring
Switch action
To start vacuuming, press
cleaner will start in higher suction power (2). If you want
to lower the suction power, press
time. The vacuum cleaner will operate in normal suction
power (1). When you press the button while the vacuum
cleaner is running, the suction power switches between
higher and normal suction power. To turn off the vacuum
cleaner, press button.
6 ENGLISH
1
1
button once. The vacuum
button one more