Hama Professional M8CD Mode D'emploi page 13

6. Troubleshooting
Error
Once you have moved
the operating switch
(4) to the "On/Auto"
position, the green LED
ready indicator (5) does
not light up constantly
The overload warning
LED (5) lights up in red
Professional M8CD
Possible cause
The connection cable
(7) is not connected
correctly.
No mains power
Device is faulty.
Too much paper has
been inserted or it has
been drawn in croo-
kedly.
Solution
Ensure that the mains
plug is plugged into the
socket.
Check your fuse box.
Inform our customer
service department.
Switch the device off
and let it cool off for at
least 30 minutes. Then
carry out the steps un-
der 4.2.4. "Reverse run
mode".
g
13