Technical Specifications - Rotel U798CH2 Mode D'emploi

The remote con-
trol does not work
Displays 'E1'
Displays 'E2'
o Do not repair or disassemble the air conditioner by yourself. Unqualified repair will
lead to failure of the warranty card, and may cause damage to users or their proper-
ties.
o If problems not listed in the table occur or recommended solutions do not work, seek
for professional advice.

TECHNICAL SPECIFICATIONS

•
Dimensions (LxWxH)
Ambient temperature range
Rated input power
Rated voltage
Rated frequency
Net weight
Refrigerant
GWP
Amount of refrigerant
This air conditioner uses R290 refrigerant, which is a fluorinated flammable greenhouse gas
covered by Kyoto Protocol, with a Global Warming Potential (GWP) of 3.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
The distance between the machine and
the remote control is too far
The remote control is not aligned with
the direction of the remote-control
receiver
Batteries are dead
Pipe temperature sensor failure
Room temperature sensor failure
Let the remote control get
close to the air conditioning,
and make sure that the remote
control directly faces to the
direction of the remote-control
receiver
Replace batteries
Check the pipe temperature
sensor and related circuitry
Check the room temperature
sensor and related circuitry
430x360x730mm
7 – 35°C
960W
220 – 240V
50Hz
27.5kg
R290
3
230g
60