Continuous Drainage; Cleaning And Maintenance - Rotel U798CH2 Mode D'emploi

o Notes:
 Keep the drain cover and the water plug within reach.
 During drainage, the unit can be tilted slightly backwards.
 If the water container should be too small to hold all the water, stuff the wa-
ter outlet with the water plug as soon as possible to prevent water from flow-
ing onto the floor or the carpet.
o When the water is discharged, put the water plug back in, and tighten the drainage
cover.
 Note: restart the machine only after the water plug and the drainage cover
are securely tightened, otherwise the condensate water of the machine will
flow onto the floor or the carpet.

Continuous drainage

Only applicable in cooling and dehumidification modes.
o Unscrew the drainage cover, and open the water plug.
o Set the drainage pipe into the water outlet.
o Connect the drainage pipe to a bucket.

• CLEANING AND MAINTENANCE

Before cleaning and maintenance, turn off the machine and unplug.
Cleaning of the housing
o Clean the surface of the machine with a damp soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc. not to damage the surface of the air conditioner or
the device itself.
Cleaning of the filter screen
o If the filter screen is clogged with dust, the air circulation will be impeded, reducing
the efficiency of the air conditioner. Therefore, cleaning the filter once every two
weeks is recommended.
1 Retaining screw
2 Wedging block
3 Wedging block
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
57