Roller Grill FD 30 Mode D'emploi page 24

b) First starting:
Before the first use, rinse the container and basket in hot water with washing liquid and
dry them with a clean and soft cloth.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Elements of command and display
Thermostat (n°3 on picture)
Safety thermostat (under the box)
Microswitch
Orange pilot light (n°2 on picture)
Green pilot light (n°1 on picture)
Putting on
- Insert the control unit into the slot being sure that it is pushed in all the way. The
deep fryer will not function if the control unit is improperly inserted, the microswitch
will prevent operation.
- Pour oil into the container; the oil level must be between the MAX and MIN
marks. It is not recommended to use solid fats.
- Turn the thermostat control knob to the desired position. When the orange pilot
light is off, your deep fryer is ready for cooking.
- Fill the basket in and plunge it into the oil.
- When cooking is finished, lift the basket and set it on its stand.
Function
Set the temperature
Automatic stop in case of overheating or
lack of oil
Automatic stop in case of improper posi-
tioning of the control unit
Oil is warming (pilot light on)
Oil is hot (pilot light off)
Machine on (pilot light on)
Machine off (pilot light off)
24