EIBENSTOCK EBS 125.4 O Notice Originale page 21

Assembly
Lock the ON/OFF switch of the concrete grinder.
On version EBS 125.4 RO set the speed to maximum.
2
1
Overload Protection
In order to protect the operator, motor and the tool, the concrete grinders
are equipped with a mechanical and thermal overload protection.
Electronic: In case of overload caused by a grinding pressure
which is too high, the
speed of the machine. You can continue working when the
grinding pressure has been reduced.
Put the top frame with the weights
2
on the frame handle of the machine.
Then put the device with the holder
under the frame handle and fix it with disc,
spring ring and wing nut
frame
3
Wind the line cord of the tool on the
holder meant for this purpose. Make
sure that the switch of the floor
guiding device is not pressed or
locked. Plug the grinder in the socket of
the floor guiding device. Lead the hose
of the vacuum cleaner above the floor
guiding device, connect it with the
grinder. The clamp will avoid a slipping
of the hose.
2
.
electronics react by decreasing the
21
2
1
on the top
3