M-system MFT 96 Mode D'emploi page 233

REPLACING THE OVEN LAMPS
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down;
• Switch off the electrical supply;
• Remove the protective cover A (fig. 6.8);
• Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C)
having the following specifications: 230V, E14 and same power (check watt power as
stamped in the bulb itself) of the replaced bulb.
• Refit the protective cover A;
Note: Oven bulb replacement is not covered by your guarantee.
A
Fig. 6.8
B
A
B
233