M-system MFT 96 Mode D'emploi page 227

When the oven starts the cooking pro-
gram the inner luminous hands are
flashing on the display indicating that
the oven is operating and they gradually
go out (one each 12 minutes).
During the cooking program it is possi-
ble, at any time, to modify the cooking
time by pressing first
then or .
At the end of the programmed cooking
time the last inner luminous hand goes
out and the oven automatically switches
off; the numbers on the programmer
display flash and a buzzer sounds.
To stop the buzzer press any of the
clock/programmer buttons.
To stop the flashing of the numbers of
the clock press
The automatic cooking program can
be cancelled at any time by pressing
button for 2 seconds.
ATTENTION: At the end of the auto-
matic cooking remember to switch off
the oven manually by turning the
function and temperature control
knobs the "0" (OFF) position.
Attention: After a power cut (black out)
the clock/programmer resets to zero
and cancels the set programs (numbers
of the clock flashing on the display with-
out luminous hands - fig. 5.9).
button and
button.
Flashing at the end
of the cooking program
Fig. 5.8
Flashing after
a power cut (black out)
Fig. 5.9
227