Lubrication; Replacing The Silencer - Festool LRS 400 Notice D'utilisation D'origine

6.1 Vanes
We recommend that the vanes on the motor be
replaced after approx. 500 operating hours.
6.2

Lubrication

If the machine is not used for longer periods, e.g.
for a weekend, introduce 1 or 2 drops of lubricat-
ing oil into the compressed-air supply [2-1] on the
machine prior to use.
6.3

Replacing the silencer

The silencer on the IAS 3 connecting piece must
be replaced at regular intervals to maintain the
power of the pneumatic tool.
7 Accessories, tools
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed specifi -
cally for the machine. Using accessories and con-
sumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on
the Internet under " ".
8 Disposal
Do not throw the tool in your household waste!
Dispose of machines, accessories and packag-
ing at an environmentally responsible recycling
centre. Observe the valid national regulations.
Information on REACh:
15