Playback; Initial Settings; Setting With The Easy Setup; Wireless Connection Setting - Yamaha AVENTAGE BD-A1060 Mode D'emploi

Masquer les pouces Voir aussi pour AVENTAGE BD-A1060:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PLAYBACK

■ Setting with the Easy Setup

Easy Setup allows you to set language, resolution, and
screen aspect ratio easily. Easy Setup screen is displayed
when you turn this Player on for the first time after
purchase. Same setting can be performed from SETUP
menu = System = Easy Setup.
1 When Easy Setup screen is displayed, press ENTER to
start Easy Setup.
2 Set the language, resolution, and screen aspect ratio by
following the on-screen messages.
Notes
– When no picture is displayed after Easy Setup is
completed, refer to "Troubleshooting" (p. 47).
– A warning message concerning 3D video playback
appears when this Player is turned on. Press ENTER
to dismiss the message or CLEAR to disable it
(p. 36).

■ Wireless connection setting

To connect this Player to your network (router) wirelessly,
follow the procedure below to configure the wireless
connection setting.
If your router (access point) supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the router without
entering network information (such as SSID) manually.
1 Press SETUP to display the SETUP menu screen.
2 Select General Setting = Network = Connection
setting = Wireless.

Initial settings

3 Press 2/3 to select Yes, then press ENTER.
4 Press 2/3 to select one of the following setup
methods, then press ENTER.
Scan: Select this option to search for available wireless
networks. When the network list is displayed, select the
SSID to be connected and enter the password.
Manual: Select this option to enter the network
information (such as SSID) manually.
Auto: Select this option to use the WPS function. Select
PBC (Push Button Configuration) or PIN code method,
then follow the on-screen messages.
Notes
– For details on operations of your router (access
point), refer to the owner's manual of it.
– When the WPS function does not work, select
"Scan" or "Manual" to configure the wireless
connection settings.
– Devices that use a 2.4 GHz frequency band, such as
a microwave, or other wireless devices, may
interrupt the wireless communication. Move this
Player away from such devices, or turn off such
devices.
– The speed of a wireless network connection depends
on your network environment (router type, distance
between the router and this Player, installation
places, etc.). In case the sound or video is interrupted
during playback, move this Player closer to the
router or change the orientation of this Player or the
antenna of the router.
3
21
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières