HSM SECURIO P40 Notice D'utilisation page 18

9 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Security level DIN 32757 - 1
Cutting capacity** (sheets), A4
Weight
Cutting speed
Intake width
Power supply
Power consumption with max. number of
sheets
Operating mode
Dimensions W x D x H (mm)
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Volume of the shredded paper container
Sound pressure level emissions
(Idle running/ load)
Cutting size of the separate CD cutting
unit (optional)
* HSM-specifi cation
** The maximum number of sheets (DIN A4, 80 g/m²), fed lengthways, which can be cut in one cycle. The performance
data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or a differ-
ent mains frequency to the one specifi ed could result in less sheet capacity and increased noise during operation. The
sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
*** Identifi ed by the letter after the 7-digit order number on the name plate on the back of the machine.
e.g. 1873111C >> cutting size 3.9 x 40 mm
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder Securio P40
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 61000-3-2:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 60950-1:2006 +A11:2009
• EN 62233:2008
Frickingen, 01.03.2013
ppa. Hubert Kötzinger - Head of Environmental Engineering Product Development
18
Strip cut
5.8 3.9
P-2 / O-2 P-2 / O-2
T-2 / E-2 T-2 / E-2
2
80 g/m 51 - 53 40 - 42
2
67 kg
100 mm/s
Order number +C, E ***
3.9 x 40 mm
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:2004
• EN 61000-4-5:2006
• EN 61000-4-6:2007 + Corr. August:2007
• EN 61000-4-11:2004
SECURIO P 40
english
Cross cut
4.5 x 30 1.9 x 15
P-4 / O-3 P-5 / O-4
T-4 / E-3 T-5 / E-4
F-1 F-2
2 3 4
31 - 33 18 - 20
110 mm/s
330 mm
230 V, 50 Hz
2.100 W
Continuous operation
580 x 550 x 936
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
145 l
60 - 62 dB(A) / 65 - 69 dB(A)
Order number +M, N ***
0.78 x 11 1 x 5
P-6 / F-3 P-7 / F-3
5 Level 6*
12 - 13 8
72 kg
2.2 x 2.0 mm
03/2013