HQ Power NLROD3O Mode D'emploi page 3

Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified
•
technician check the device once a year and once before you bring it into service.
Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
•
Overhead mounting requires extensive experience: calculating workload limits, determining the installation
•
material to be used... Have the material and the device itself checked regularly. Do not attempt to install
the device yourself if you lack these qualifications as improper installation may result in injuries.
Before mounting make sure the installation area can hold a minimum point load of 10 times the device's
•
weight.
• Make sure there is no flammable material within a 0.5m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
The installation has to be approved by an expert before the device is taken into service.
•
How to install: Choose an appropriate installation spot. Fix each bracket (at ± 1550mm apart) onto the wall or
ceiling with the included screws using an appropriate screwdriver. Click the fluorescent tube into the brackets.
5. Use
Turn the device on or off with the ON/OFF button.
6. Cleaning and Maintenance
All screws should be tightened and free of corrosion.
•
The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
•
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
Moving mechanic parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain the
•
device.
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts.
•
Contact your dealer for spare parts if necessary.
•
7. Technical Specifications
power supply
power consumption
dimensions
weight
max. ambient temperature
optional stand
available colours
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 04 – 01/10/2013
NLROD3x
230 Vac
18 W
725 mm x Ø 35 mm
0.5 kg
45 °C
NLROD/ST
orange: NLROD3O
white: NLROD3W
yellow: NLROD3Y
3 ©Velleman nv