Hold Function - Sharp MD-MT88H Mode D'emploi

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a
crowded train.
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
E-31
ENGLISH
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.