Hold Function - Sharp MD-MT90H Mode D'emploi

Hold Function

The present operation condition can be kept even if
other buttons are accidentally pressed in a place such
as a crowded train.
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
E-27
ENGLISH
To cancel the hold mode
Move the HOLD switch away from the safety position
(the opposite direction of the arrow).
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.