Sharp MD-MT88H Mode D'emploi page 131

„ To display the playing time of an individual
track
1
Whilst in the stop mode, press the
ton to display the track number and track name.
2
Press the DISP button to display the playing
time for that track.
Each time the or
ing time of the previous or next track will be dis-
played.
or but-
Track number
Track name
Playing time
button is pressed, the play-
„ Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
z When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
z If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.
z The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
z When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
E-28
ENGLISH