Sharp MD-MT88H Mode D'emploi page 113

4
Press the PAUSE button on the stereo system
to enter the playback pause mode.
Here you can search for the track to record.
5
Press the MODE/CHRG button repeatedly to se-
lect the recording mode (page 17).
6
Press the PLAY/PAUSE button to start the Mini-
Disc unit recording.
7
Begin playback on the stereo system, the out-
put will be recorded.
To interrupt recording
Press the PLAY/PAUSE button.
z To resume recording, press the PLAY/PAUSE button
again.
z The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the /:OFF button.
z When recording stops, "TOC" appears. Whilst "TOC"
appears, the MiniDisc recorded contents have not yet
been updated.
z To prevent the new recording from being lost, it is not
possible to remove the MiniDisc whilst "TOC" is dis-
played.
Notes:
z Changing the volume level whilst recording does not
affect the recording.
z You cannot adjust the bass level whilst recording.
TOC display
ENGLISH
E-10