Bose CINEMATE 1 SR Guide D'utilisation page 5

3. Press and hold
light. The remote is now in the setup mode.
4. Press . Only this button will remain lit.
5. On the number keypad, enter the device code for
your brand of TV. The TV source button (
should blink twice and then turn off.
Note: If all five source buttons flash rapidly three times,
the code was invalid. Go back to Step 1 and try another
code.
6. Point the remote at your TV and press TV power.
TV power
If your TV does not respond, go back to Step 1 and
try another code.
To program the remote to control other devices:
Follow the same procedure for each of your other
devices, using the appropriate device code and
source button for each one.
To control a combination device:
• If you are programming the remote to control a
combination device that has more than one source,
such as a VCR/DVD unit, you can program the associated code for either source
button. For convenience, you may want to program the code twice – once for the
VCR button and once for the DVD button.
• To find the right device code, first search the "COMBINATION" listings in the
Universal Remote Device Codes book. If you cannot find a valid code there,
then search the listings for individual device types (TV, CBL, VCR, DVD, etc.).
until all five source buttons
C
ONTROLS AND
)
I
NDICATORS
Source buttons
Source power buttons
English – 5