Plum FIXATION PIKA Mode D'emploi page 47

Using instructions
STEP IN / LOCK IN / RELEASING
The utilisation of stop-ski accessory does not change the overall
functioning of your binding at all. So please refer to the binding
user manual.
USE
MOUNTING / SETTING
The PIKA binding is delivered with a heel support present on
the heel. In order to install the PIKA stop-ski attachment:
remove the heel support by unscrewing the retaining screw
on the side of the adjustable base. Place the stop-ski at the
heel support position without forgetting to tighten it with the
retaining screw.
« WALK » POSITION :
To be able to use your binding in fashion "walking" mode, it
is necessary to block your accessory ski stopper in high
position, so that this one does not hinder the travel of the ski.
For that purpose, please apply the following manipulations:
1- To push on the ski stopper shim
To lower the shim, apply a strength downward.
19 | P a g e
Mode d'emploi