Self Clean Operation; One-Hour Off Timer - Sharp AY-XP7FR Mode D'emploi

SELF CLEAN OPERATION

SELF CLEAN operation will provide effect to reduce the growth mold fungus, and to dry
inside of the air conditioner unit with Plasmacluster ions. This operation is accompanied
by FAN or HEAT mode. Utilize the operation at seasonal change over terms.
Mold fungus already grown can not be eliminated by this operation.
MODE
1h
CLEAN
FAN
NOTE
:
• You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF
CLEAN operation.

ONE-HOUR OFF TIMER

When the ONE-HOUR OFF TIMER is set, the unit will automatically turn off after one
hour.
MODE 1h
CLEAN
FAN
NOTES:
• The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF
operations.
• If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for
an hour at the formerly set condition.
• If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is
activated, press the ONE-HOUR OFF TIMER button again during operation.
• If TIMER ON and/or TIMER OFF are set, TIMER CANCEL button cancels every setting.
1
Press the SELF CLEAN button when the unit is not
operating.
• The remote control displays "
• The blue PLASMACLUSTER lamp on the unit will light
up.
• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated on the
TEMPERATURE INDICATOR of the indoor unit in minute
decrements.
TO CANCEL
1
Press the SELF CLEAN button.
Alternatively, turn the unit off by pressing the ON/OFF
button.
• The blue PLASMACLUSTER lamp on the unit will turn
off.
1
Press the ONE-HOUR OFF TIMER button.
• The remote control displays "
• The orange TIMER lamp (
• The unit will stop operating after one hour.
TO CANCEL
Press the TIMER CANCEL (SET/C) button.
1
• The orange TIMER lamp (
Alternatively, turn the unit off by pressing the ON/
OFF button.
• The red OPERATION lamp (
TIMER lamp (
E-13
".
".
) on the unit will light up.
) on the unit will turn off.
) and the orange
) on the unit will turn off.