x "Sound" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Sound" icon ( ),
then press
"Sound Mode"
"Balance"
"Intelligent Volume"
"Surround"
* You can adjust the setting to your personal preference in the "Sound Adjustment"
option only when the "Custom" mode is selected.
• "Intelligent Volume" is not selectable when "TruSurround" is selected.
Adjusting the "Sound Adjustment" items under "Custom"
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of "Custom" mode in the menu.
1
Make sure that "Adjust" is selected, then press
Selecting "Reset" will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
The adjusted settings will be received when you select "Custom".
• Adjusting higher frequency will affect higher pitched sound and adjusting lower
frequency will affect lower pitched sound.
• You may display the settings directly by using the
page 8).
.
Choose either "Dynamic" (low and high tones), "Standard"
(voice and high tones) or "Custom"*.
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
Adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select "On", then press
To cancel, select "Off", then press
Choose either "TruSurround" (surround sound that spreads
out to the rear of a room), "Sports" (simulated stadium
effect for monaural sound) or "Off".
.
button on the remote control (see
Sound
Sound Mode:
Sound Adjustment
Balance
Intelligent Volume:
Surround:
Select
Confirm
.
.
.
Dynamic
Off
Off
End
13
GB