HQ Power FLOWER BURST RGB Mode D'emploi page 5

4.2 Second Attachment
When hung, the luminaire must always be secured with a secondary attachment e.g. a safety cable.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 remote receiver
2 bracket
3 microphone
Remote Control
auto mode on
sound mode on
blackout
strobe start/stop
strobe rate down
strobe rate up
green
red
6. Operation
1. Connect the device to the mains using the included power adapter.
2. Adjust the sensitivity level with the sensitivity control. Use the remote control to select the desired
colour mode.
3. Disconnect from the mains after use.
V. 01 – 20/01/2017
HQLE10017
4 sensitivity control
5 power input
5
green
green, blue
red, green
blue
red, green, blue
red, blue
red, blue
red, green
©Velleman nv