V-ZUG AdorinaLavage V200 Mode D'emploi page 101

6.14.2 To deactivate the child lock:
Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on
the panel, "Child lock enabled" light will turn off.
6.15 Canceling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold On / Off
button for 3 seconds.
C
If you press
cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open
the loading door since the water level in the machine is above the loading door opening, then turn the
Programme Selection
6.16 End of programme
End LED appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all
indicators are turned off.
Completed programme steps will be displayed if you press On / Off button.
6.17 Your machine features "Standby Mode".
After you switch on your machine with On-Off button, if no program is started or no other procedure
is performed at the selection step or no action is taken within approx. 10 minutes after the selected
program ends, your machine will switch to OFF mode automatically. Display and all indicators are
turned off. Selected programme data will be displayed if you press On / Off button. Before you start
the program, check the accuracy of your selections. If necessary, repeat them. This is not an error.
Washing Machine / Operating instructions
On / Off
button when the Child Lock is enabled, the programme will not be cancelled. You should
Pump+Spin
knob to programme and discharge the water in the machine.
101 / EN