Technical Specifications - Alto Professional MIXPACK Express Guide D'utilisation Rapide

TECHNICAL SPECIFICATIONS

MIXER SECTION:
FREQUENCY RESPONSE:
IMPEDANCE:
SNR:
THD+N:
EQUALIZATION:
DSP SECTION:
SPEAKER SECTION:
SYSTEM TYPE:
FREQUENCY RESPONSE:
SPHERICAL HORN COVERAGE:
POWER:
PROTECTION:
SPEAKER SPECIFICATION:
INPUT CONNECTIONS:
AMPLIFIER SECTION:
OUTPUT POWER:
IMPEDANCE:
PROTECTIONS:
DIMENSIONS (W x D x H):
WEIGHT:
Inrush current at initial switch-on: 2.04A
Inrush current after power supply interruption: 3.08A
* Specifications are subject to change without notice.
10 Hz – 55 KHz (+ 3 dB)
3.9 KΩ (mic input)
> 10 KΩ (all other inputs)
2.2 KΩ (tape out)
120 Ω (all other outputs)
> 94 dB
0.04% at 0 dBu, 1 KHz (mono input channels)
0.015% at 0 dBu, 1 KHz (stereo input channels)
High shelving: + 15 dB @ 12 KHz
Low shelving: + 15 dB @ 80 Hz
7-band graphic equalizer: + 15 dB @ 63 Hz, 160 Hz, 400 Hz,
24-bit A/D and D/A converters
24-bit DSP resolution
Effects (16 presets): Reverbs (Hall, Room, Vocal, Plate), Stereo Delay,
Controls: 16-position selector, clip LED, mute switch with LED indicator
2-way Coax vented box
65 Hz – 20 KHz at -10 dB
70° H x 70° V
150 W AES Standard
300 W Peak
Electronic circuit on driver
10" (254mm) low-frequency driver; 2" (51mm) voice coil;
1" (25mm) Neodymium high-frequency driver; 1" (25mm) voice coil
1/4" (6.3mm) mono (TS) jack on each cabinet
350 W (EIAJ)
4 Ω load
Overload, short circuit, soft clipi limiter, thermal protection fan cooling
38.7" x 17.3" x 18.1" (983mm x 439mm x 460mm) (compact)
59.5 lbs (27 kg)
www.altoprofessional.com
MANUAL VERSION 1.3
1 KHz, 2.5 KHz, 6.3 KHz, 16 KHz
Reverb + Delay, Reverb + Chorus
.