Sinmag Europe RV01 Mode D'emploi page 8

ENG
8. MAINTENANCE
CAUTION: For periodic maintenance and repairs, electrical
diagrams are with the unit.(on the back of the control door)
CAUTION: Service on this, or any other SINMAG appliance must
be performed by qualified personnel only.
CAUTION: Disconnect from power source when cleaning and/or
servicing this unit.
CAUTION: Never attempt to clean this unit while it is hot as the
risk of serious burn.
• The oven can be cleaned with damp cloth. Do not clean stainless surfa-
ces with chlorine detergent and tools which may scratch stainless surfa-
ces. It is important to thoroughly remove the detergent left at the surface,
but do not flush the oven with water directly as it may cause short circuit.
• Check that the air distribution system is clean. A dirty system might cause
an uneven baking result. The meshed sheets should be cleaned with a
rigid brush or compressed air.
• After baking, open the loading door to release vaporous wastes and take
residue out of chamber. It can prevent next batch of products from peculi-
ar smell and taste.
• Check control panel, door gasket, cable and water pipeline often to ensu-
re them in good condition.
• If the circuit breaker trips, disconnect the unit from power supply and
attempt to reset. If the oven doesn't work properly or still trips after reset,
please ask technician for a thorough check.
8
SINMAG EUROPE BVBA