Windsor M17XIC Mode D'emploi page 8

TROUBLESHOOTING
PROBLEM
No power to
machine
Electrical shock
Circuit breaker
tripping
POSSIBLE CAUSE
Dead electrical circuit
breaker or fuse box.
Faulty circuit breaker
Faulty power cord
Equipment not
grounding
Receptacle not
grounded
problem
Faulty circuit breaker
Mechanical problem
WIRING DIAGRAM
START
SOLUTION
Check building circuit
Power switch failureTest switch for continuity and replace if
necessary.
Replace.
Replace.
Follow grounding instructions exactly.
Have an electrician inspect building's
wiring.
Ensure that the machines wiring matches the wiring
diagram.
Replace any wires or components which
are short circuiting.
Test circuit breaker for continuity.
Replace circuit breaker if necessary.
Higher amp draws indicate a mechanical problem, find
the parts which are not moving as freely as they should,
and repair or replace.
8