attika Q-Tee II GAS Manuel De L'utilisateur page 171

attika
English RAIS/ - User manual for Q-Tee II Gas / Q-Tee II C Gas
Remove the injector for the main burner by
loosening the coupling and carefully pulling
the pipe out and then unscrewing the injec-
tor. Fit the LPG injector and tighten the lock
nut. Finally, re-tighten the coupling.
Replace the injector for the pilot light by
loosening the coupling and carefully pull-
ing the pipe out. Note. The small pilot light
injector should now fall out and can be
replaced with the LPG injector.
19