Commissioning And Operation - Klarstein MR. BARBOT Mode D'emploi

EN
18

COMMISSIONING AND OPERATION

Before the first operation
It is recommended to clean the interior of the Party Cooler with a little lukewarm water
and a mild detergent and then dry it thoroughly.
The temperature in the refrigerator depends on the following factors:
• The ambient temperature
• How often the cover is opened
• The contents of the fridge
Therefore, the time it takes to reach the desired temperature may vary.
The cooling system is designed to be used on a flat, even surface. Therefore, prevent the
unit from tipping. If the unit does need to be tilted during transport, for example, allow
it to rest in an upright position for 20 - 30 minutes before reconnecting it and resuming
operation.
Commissioning
1. Insert the plug into a socket.
2. Press the ON/OFF switch next to the digital display to switch on the machine.
3. Press the thermostat button to the left of the display to set the desired temperature.
The display will blink during the setting. The thermostat ranges from 6-16°C. During
operation, the display shows the current temperature in the refrigerator.
Recommended temperature settings
• Beer and lemonade 4°C
• white wine 7-10 °C
• Red wine 12-16°C
The following measures can improve the cooling capacity:
• When you use the unit for the first time, allow it to be used for 12-18 hours
continuously.
• Change the shelf positions inside the refrigerator approximately every 6 hours.
• Make sure that there is as much space as possible between the products to be
cooled. Do not overload the interior.