Cleaning And Care - Klarstein Robuchon Mode D'emploi

EN
70

CLEANING AND CARE

Regular cleaning will ensure that your device retains its appearance and will function
fully for a long time. The following explains how to clean your machine. Depending
on the model you have purchased, not all of the above areas may be included in your
model.
Do not use any:
• Aggressive cleaning agents;
• Cleaning agents with a high alcohol content;
• scouring pads or sponges;
• High pressure or steam cleaners
• Special cleaning agents that must be used when the device is still hot.
Note: Wash new sponges thoroughly before using them for the first time.
Area
Stainless steel front (outside)
Plastic
Painted surfaces
Cleaning
Hot soapy water
Clean the stainless steel front with a damp cloth and
then wipe it dry with a dry cloth. Remove residues
of lime, grease, starch and albumin (e.g. protein)
immediately, otherwise corrosion may occur. Some
stainless steel cleaners, which are also suitable for
hot surfaces, can be purchased. Spray this onto a soft
cloth and rub gently over the surface.
Hot soapy water
Clean the plastic surfaces with a damp cloth and then
wipe them dry with a dry cloth. Do not use a glass
cleaner or glass scraper.
Hot soapy water
Clean the painted surfaces with a damp cloth and
then rub them dry with a dry cloth.