Klarstein Robuchon Mode D'emploi page 54

EN
54
Using the device
1. After connecting the appliance to the power outlet, turn the function dial to set the
desired function. Turn the adjustment knob to set the operating temperature.
2. When you touch the START/PAUSE button, the unit starts operating. If you do not
touch this icon, the unit will return to standby mode after 5 minutes and the time will
be displayed on the screen.
3. 3 During preparation, you can press the ON/OFF key to cancel the preparation
and the START/PAUSE key to pause it.
Note: Once you have set the temperature, press the TIME key. You can now set the
desired preparation time by turning the adjustment knob.
Fast preheating
This function can be used to shorten the preheating process. Select a function and touch
the symbol for fast preheating. The symbol lights up on the screen. The function can be
used in all modes except „Defrost", „Fermentation" and „ECO". If the function is not
available, this will be indicated by a beep from the unit when the key is pressed.
Setting the end time
1. Complete the time setting.
2. Touch the END TIME button and set the hour with the right-hand dial. Press the END
TIME button again to set the minutes. Press the END TIME button again to confirm.
3. Turn the left function dial to set the desired function. Use the right adjustment knob to
set the temperature and time.
Note: For example, if you have selected 10:00 for the end time and have set
the preparation time to one hour, the appliance will automatically switch on at
09:00 and switch off at 10:00. This function cannot be used in the „Defrost" and
„Fermentation" modes.