Pyrolysis Function (Self Cleaning) - Klarstein Robuchon Mode D'emploi

EN
56

PYROLYSIS FUNCTION (SELF CLEANING)

The device has a pyrolysis function. This function allows the open interior to be cleaned
without much effort. The interior of the oven is heated to very high temperatures during
this function. Food residues inside the oven will burn. For your own safety, there is only
one setting for the pyrolysis function and the temperature and duration of use cannot be
adjusted.
For your safety, the oven door is automatically closed when using the pyrolysis function.
The door can only be opened again when the inside of the oven has reached a
relatively safe temperature range. The interior lighting remains switched off during this
function.
Important notes on safety when using the pyrolysis function
• The interior of the oven becomes very hot when the pyrolysis function is used.
Never attempt to open the oven door by force. Let the appliance cool down before
opening the oven door. Keep children, frail and vulnerable persons away from the
appliance at all times.
• The outside of the appliance becomes very hot while using the pyrolysis function.
Never touch the oven door. Let the appliance cool down. Keep children, frail and
vulnerable persons away from the appliance at all times.
• When using the pyrolysis function, the inside of the oven is heated to such high
temperatures that food residue is burnt. This releases vapours that can irritate the
mucous membranes. Therefore, make sure that the kitchen is well ventilated while
using the pyrolysis function. Do not stay in the kitchen for a long period of time
during this time. Keep children and pets away from the Si
Before using the pyrolysis function
• Remove all accessories and cookware, including the pull-out shelves, from the
inside of the oven before starting the pyrolysis function. Ensure that there are no
large amounts of liquid residues inside the appliance. This ensures that good
cleaning results are achieved and that the accessories have a long service life.
• Remove very heavy soiling manually before using the function.
• Clean the inside of the oven door and the edges of the oven interior in the sealing
area. Do not use abrasive cleaners and never remove the seal.
• Make sure that the oven is switched off while performing the above operations.