Publicité
Les langues disponibles
Les langues disponibles
Problem
The appliance is not working.
The temperature inside the freezer
compartment is not low enough.
The normal operating sound changes or
becomes louder.
Water is collecting on the bottom of the
unit.
Transporting the appliance
The unit must be transported only in its vertical position.
Do not tilt it any more than 30°. During transport, ensure that the unit is properly secured
and protected against shock, vibration and shifting.
Disposal
This appliance has been manufactured from recyclable materials. After removing the
plug from the wall socket, the unit should be rendered unusable by cutting off the
power cord before being disposed of through special waste collection points in
accordance with local regulations. The refrigerant and the chemical agent in the insulation
foam must be disposed of through a competent agency. Take special care not to damage the
cooling circuit before the unit is handed over for competent disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two
Possible cause and solution
- There is a power failure
- The main fuse has blown.
- The temperature control is set to '0'.
- The fuse in the wall socket (if
applicable) has blown. This can be
checked by connecting another
electrical device to the socket and
checking for function.
- Too much food has been stored in the
appliance.
- The doors are not properly closed.
- There is too much dust on the
condenser.
- Insufficient ventilation: the unit is too
close to a wall or other structure or
object.
- Check for proper positioning (uneven
floor?).
- Are any adjacent objects affected by
the running of the cooling unit (i.e.
caused to vibrate?)
- Are there any objects on top of the unit
which might be vibrating?
The melt-water drain system is blocked.
Remove the blockage and clean the
system.
17
Publicité
