Télécharger Imprimer la page

SEVERIN KS 9814 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
over and damaging the electrical insulation.
Only food commonly used in domestic households should be stored in the unit.
Alcoholic substances may be stored only in properly sealed containers and in upright
positions.
To avoid the risk of food poisoning, do not consume food after its storage time has
expired.
Do not lean or put undue weight on the shelves, compartments, door etc.
Protect the inside of the freezer at all times from open flames and any other sources of
ignition.
After setting up the unit, wait for 3-5 minutes before connecting it to the mains and
switching it on. The liquid coolant needs a certain time to collect at the lowest part of
the cooling circuit after transport.
Remove the plug from the wall socket
- bei in case of any malfunction,
- bei before de-frosting,
- bei during cleaning.
Children are not aware of the dangers that may occur when operating electrical
appliances. Ensure adequate adult supervision and never let children play with the
appliance.
In order to comply with safety regulations and to avoid hazards, any repairs or
modifications to this unit must be carried out by our authorised service personnel,
including the replacement of the power cord.
We reserve the right to introduce technical modifications.
If the unit is not used for an extended period of time, we recommend keeping the door
open.
If the unit is sold, handed over to a third party or disposed of at a suitable recycling
facility, attention must be drawn to the presence of the insulation agent 'cyclopenthane'
C
H
as well as to the refrigerant R 600 a.
5
10
Familiarisation
1. Ice-cube tray
2. Temperature control
3. Drip tray
4. Removable shelf
5. Freezer compartment
6. Door compartment
7. Bottle compartment
8. Adjustable feet
There is a freezer compartment in the upper section of the unit that can be closed by a door.
Before using for the first time
- Remove any exterior and interior packaging materials completely, including the adhesive
strips.
Before it is connected to the mains, the unit must be thoroughly checked for transport
damage, including its power cord.
- Clean the unit as described in the 'De-frosting and cleaning' section.
- Wait several minutes before connecting the unit and switching on.
12

Publicité

loading