Controls/Settings - Envion thera pure TPP240 Mode D'emploi

OPERATING THE THERAPURE

Controls/Settings

Power Control – To operate the Therapure
on the air purifier, press the button again to turn off the air purifier.
Timer Control – The Therapure
of time. Press the "TIMER" button to program the timer. Each press will add one hour up to a total of
24 hours. Keeping the button pressed will automatically increase to 24 hours, 1 hour at a time, after
that it will turn back to off.
ION Generator – Press the ION Generator button to turn on the ions. Press it again to turn
off the ions.
Speed Control – The Therapure
Press "SPEED" button to cycle the settings and select the fan speed you desire. The speed state
will be shown on the LED display.
UV Control – Press the UV/VOC control button "UV/VOC" to turn on the UV lamp.
Press it again to turn off the UV and VOC.
Clean Filter Indicator Light – The Therapure
the filter needs to be cleaned.
Reset Filter Control – Press down the "TIMER" and "ON/OFF" button for 3 seconds, the clean filter
light will flash 3 times and then the clean filter light will turn off, indicating the unit has
been reset.
Clean Filter
Indicator Light
Timer Button
Speed Button
TPP240
240 air purifier,press the "ON/OFF" button to turn
®
240 air purifier can be programmed to turn off after a preset amount
®
240 has three different speeds of cleaning, LOW, MED and HI.
®
Clean Filter Indicator Light will turn on each time
®
240
®
LED Display
ION Button
Power Button
UV/VOC Button
12