Replacing The Uv Lamp - Envion thera pure TPP240 Mode D'emploi

15
CLEANING & MAINTENANCE
Before replacing the UV lamp, make sure the Therapure
off and unplugged. Let the lamp cool down for 5 minutes before replacing it.

Replacing the UV Lamp:

1. Release the inlet grill by pressing on the locking latch (see diagram of Main Parts).
2. Remove the two bolts used to fix the UV lamp cover and remove the cover out from the unit.
3. Unscrew the old UV lamp from the lamp base of the unit.
4. Install the new UV lamp into the lamp base of the unit.
5. Install the UV lamp cover with the two bolts on the unit.
6. Install the inlet grill on the unit.
1.
2.
3.
240 air purifier is turned
®
4.
5.
6.
TPP240