Biomimetic Adjustment - Blatchford AvalonK2 Instructions D'utilisation

8 Biomimetic Adjustment

Note: Carry out static alignment while ensuring the user has some means of support
such as parallel bars. This is standing alignment only.
Check the Bench Alignment and the heel height
Adjust the angle
of the foot at the
distal pyramid
interface
The device should encourage some degree of self adjustment to achieve a sense of balance for the user
during standing.
Ensure valve is set to 2
(the user must feel some
movement)
User standing upright
with weight evenly
distributed on each foot
is user in
a stable position?
(using minimal
muscle control)
YES
Can the user
NO
dorsiflex the
ankle approx.
6 degrees ?
YES
Allow the user to become
accustomed to the setup
before continuing
* e.g shift foot slightly, tilt using
proximal and distal interfaces
*Shift foot
forwards
relative to
socket
YES
falling
forwards
NO
Continue
Dynamic Adjustment
8
*Shift foot
backwards
relative to
socket
NO
falling
backwards
to
938327/8-0819