Publicité
Les langues disponibles
Les langues disponibles
2. INSTALLATION
2.1 Location
When selecting a position for your unit you should make sure the floor is flat
and firm, and the room is well ventilated. Avoid locating your unit near a heat
source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may
increase the electrical consumption. Extreme cold ambient temperatures may
also cause the unit not to perform properly. The unit is not designed for use in
a garage or outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is left at both sides, 10
cm at the rear and 30 cm at the top of the unit. This will allow cold air to
circulate around the wine cooler and improve the efficiency of the cooling
process.
2.2 Installation of the door handle (optional)
1) Remove the plugs from the door
handle holes.
2) Insert the handle into
the screw holes and
tighten it to secure it.
6
V.2
Publicité
