3.1
Transport
The filters must be secured to prevent shifting and falling during transport. If the filters are secured for
transport using tension belts, make sure that the filters remain undamaged.
Stress caused by impacts must be avoided at all costs. The filters must in no event be rolled or dragged
across the ground.
3.2
Storage
If the filters require intermediate storage, this must be done on suitable level ground. During storage,
damage caused by environmental or external factors must be avoided.
All dimensions are in mm.
mail@graf.info
www.graf.info
3.
Transport and storage
4.
Technical data
870
Telescopic dome shaft 400
green
VS inlet module 400
Sieve basket belt
Sieve basket
Filter bag with substrate
Bearing
stainless steel
Housing for substrate filter 400
9 / 24
plate
made
from