Beurer Janonh JBY 08 Mode D'emploi page 10

Operation
Note
Please thoroughly mix the bath water to ensure an accurate measurement.
Note
Always check the bath water temperature before bathing your baby!
Recommended water temperature
Small children: 36 °C – 38 °C
Adults: 38 °C – 40 °C
Switch on the bath thermometer by briefly pressing the On/Off button
the front of the thermometer.
Whilst the measured temperature remains below 20 °C (68.0 °F), "Lo °C (Lo °F)"
will be shown in the display. If temperatures above 60 °C (140 °F) are measured,
"Hi °C (Hi °F)" will appear in the display.
This bath thermometer comes equipped with a hot water alarm. If the water
temperature exceeds 38 °C, the LED lights up red. This means the water is too
hot for your baby and there is a danger of scalding.
If the bath water temperature is between 36 °C and 38 °C, the LED lights up
green and you can bathe your baby.
If the LED does not light up, the bath water temperature is below 36 °C.
To switch off the device, press the On/Off button
The bath thermometer switches off automatically after 10 minutes.
again.
10
on