Pushbutton Outdoor Station With Display Module - ABB -Welcome M Mode D'emploi

ABB-Welcome M
5.2

Pushbutton Outdoor Station with display module

The Display and card reader module can be assembled
with a push button outdoor station and the user can
swipe cards to open the door. For such combination, a
master card is needed for an electrician to manage this
outdoor station.
Register a master card/deactivate master card (we
recommend that this work is carried out by specialized
personnel):
1. Disconnect the power supply.
2. Reconnect the power
3. Hold the "program button" for 5s to enter "program
master card" interface within 30s.
4. Any card swiped by the reader during this time will
be taken to be the new MASTER card. A prompt
"Register master card successfully" will appear on
the screen.
5. If the card exists, when you swipe it again, the
information will be deleted, and a prompt "Delete
master card successfully" will appear on the
screen.
Only 1 master card can be registered.
Enter system setting using master card:
1. Swipe the MASTER card to enter the setting menu. Three LEDs will turn on.
2. 6 options:
Program Card;
Language;
Wiegand Output;
Choose Door
Date & Time;
Back
There is a 5s countdown for each option.
3. Swipe the MASTER card again within 5s to change to the next option.
Or, 5s over, the current option will be chosen.
|
Operation
Fig. 21
— 24 —