ABB -Welcome M Mode D'emploi page 29

ABB-Welcome M
Turn on the "logic address" call mode
#* system password #
Configuration => Call mode
Call Mode_______
Physical Add.
Logic Add.--------
3. By resident name
(Remarks: this function is only available for the outdoor station with a keypad module
(M251021K-.).)
In the standby mode, press the button
Use the buttons
button to make a call.
Also, a visitor can enter the resident name with a keypad directly to make a call.
Resident names must be assigned first and then associated with the physical address.
#* system password #
=> Address Book =>
Physical Add.:
01001
User Name:
Federico
5.4.2 Call the guard unit
Press the button
30 s
Guard Unit
"*" to Cancel
|
=> system setting
No. Of digit:
∧
==＞
∨
(1-8 Digits)
and to search for the desired residential station and press the
=> system setting
Add => Contact List
to make a call to a guard unit.
Accept the call
120 s
==＞
Guard Unit
"*" to Cancel
=>
-4-
or the button to display resident names.
Operation
- 28 -