Gladiator GEARTRACK Instructions D'installation page 2

GEARTRACK
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
GEARTRACK
Remove all parts and fasteners from their packaging, and dispose of/recycle all packaging materials.
■
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
■
Parts
#8 x 1¹⁄ "(3.08 cm)*
4
#8 x 2" (5.08 cm)
(included)*
/ " (4.76 mm) x 1¾"
3
16
(4.45 cm)**
Construction adhesive
2" (5.08 cm) x 4" (10.16
cm) Wooden studs
¹⁄ " (6.3 mm) x 2³⁄ "
4 4
(6.99 cm)**
* Use an all-weather flat-head type deck screw.
** Use a flat-head type masonry screw.
CHANNELS AND GEARWALL
®
INSTALLATION
Your safety and the safety of others are very important.
CHANNELS/GEARWALL
®
INSTALLATION INSTRUCTIONS
Parts and Tools
GearTrack Channels
®
Masonry
Bare Wood
/ Poured
Studs
Concrete
SAFETY
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
PARTS
Drywall Over
Wood Studs Masonry
½"(1.3 cm), / Poured
/ " (1.6 cm), Concrete
5
8
¾" (1.9 cm)
PANELS
®
PANELS
®
GearWall Panels
®
Drywall Over
Wood Studs
Bare Wood
½"(1.3 cm),
Studs
/ " (1.6 cm),
5
8
¾" (1.9 cm)
2