Mopping Mode (Water Tank) - Amibot vision Manuel D'utilisation

Operation

Mopping mode (water tank)

Figure 1
Figure 3
Connect the two compartments to each other (Figure 1).
Attach the cleaning pad to the water tank using the Velcros. (Figure 2)
Open the water tank's refill nozzle and carefully pour in clean water
with some pH neutral hard floor cleaner (Figure 3).
Insert the water tank into its compartment (Figure 4) The vacuum
mode stops when the mopping mode is selected; the vacuum
automatically stops when the robot detects the water tank.
Figure 2
Figure 4
19
EN