Güde GSBSM 450 Traduction Du Mode D'emploi D'origine page 22

ENGLISH
18
Technical Data
Spindle belt sander
Art. No
Rated voltage
Rated frequency
Rated input
No-load speed
Degree of protection
Belt speed
Belt size
Sanding surface max.
Adapter rolls
Workpiece dimensions min.
Dimensions L x W x H
Weight
Noise details
Sound pressure level L
Sound power level L
Measured according to EN61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
The numerical values given are emission levels and not necessarily safe working levels. Although there is a
correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to
determine whether or not any additional safety measures are necessary. The characteristics of the work space,
other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are
all factors that can influence the actual exposure levels of the employees. Moreover, the acceptable exposure
levels can vary from country to country. This information should enable the machine's operator to carry out a
better assessment of the risks and hazards.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the
Specified Conditions Of Use
This device is exclusively for working on surfaces and
for deburring wood or materials similar to wood. The
maximum sanding surface and safety cautions must
be taken into consideration.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
the unit and fit other protective equipment instead.
GSBTSM 450
38353
220 - 240 V
50 -60 Hz
450 W
2000 min -1
IP 20
8 m/s
100 x 610 mm
210 x100 mm
Ø 2", 1-1/2", 1", 3/4", 1/2"
50 x 50 mm
390 x 330 x 450 mm
13 kg
76 dB (A)
89 dB (A)