Safety Instructions - Sony XW-LF3-T Mode D'emploi

About the AC adapter

Safety instructions

To ensure your personal safety and to maximize the full operating potential of your unit,
read and follow these safety instructions.
Read & Retain Instructions
Read all operating and user information
provided with this product.
Cleaning
Use a damp cloth to clean the exterior
housing. Avoid using any fluids including
liquid, aerosol or alcoholbased cleaning
products.
Water or Moisture
Avoid operating or locating this product
near water or other sources of fluid.
Accessories
Do not place this product on an unstable
cart, stand, or table. The product may fall
and be seriously damaged.
Ventilation
Do not block or cover this product in use.
This unit should not be placed in a built-in
installation unless properly ventilated.
Environment
Avoid placing this product in a location with
exposure to large quantities of dust, high
temperatures, high humidity, or subject to
excessive vibrations or shocks.
Power Sources
Operate this product only from the
recommended power sources. If you are
unsure of the power source, consult an
authorized Pioneer representative.
Power-Cord Protection
When unplugging the unit, pull on the plug
ñ not on the cord. Do not handle the cord or
plug with wet hands; doing so could cause
an electric short or shock. Do not allow
anything to pinch or rest on the power cord
and do not place in a walkway.
Power
Turn OFF the system before installing this
or any other hardware device.
Overloading
Avoid connecting too many devices to a
single wall socket or power source as this
can cause fires or short circuits.
Object & Liquid Entry
Never push inappropriate objects in to the
device. Avoid spilling any liquids in to or on
the outside of the drive.
Servicing
Opening or removing the cover exposes you
to possible electrical shock or other danger.
Contact a Pioneer authorized service
representative for repairing this product
(refer to the enclosed Service & Support
Card).
Damage Requiring Service
Unplug the unit and refer servicing to
qualified service personnel in the following
situations:
• When the power cord, plug, or chassis is
damaged.
• If liquid has been spilled, or objects have
fallen into the product.
• If the product has been exposed to rain
or water.
7
En