Cautions On Use; When Moving This Unit; Place Of Installation - Sony XW-LF3-T Mode D'emploi

Cautions on use

When moving this unit

When moving this unit, press
STANDBY/ON button, and then unplug the
power cord.
Damage may occur when another device is
connected to the AUX jack.
• Do not place anything easily effected by
magnets close to the unit, such as cash
cards or commuter tickets. The speakers
do not have magnetic shielding, and
their magnetic effects may prevent such
items from functioning correctly.
• When transporting the unit, it is
recommended that you protect it from
scratches etc. by using the supplied
carrying pouch.

Place of installation

• Do not place this unit on top of a TV or
color monitor. Also, install it away from
cassette decks and other devices easily
affected by magnetic forces.
• Avoid the following locations:
•Places exposed to direct sunlight
•Humid or poorly ventilated places
•Extremely hot places
•Places exposed to vibrations
•Places in which there is much dust
•Places exposed to soot, steam, or heat
(kitchens, etc.)
•When the volume on the unit is turned
up, depending on the place of
installation, the vibration from the
speakers may cause the unit to move.
Choose the place of installation
carefully, and if necessary make use of
the supplied non-slip sheet.
•Do not use the unit close to medical
electronic equipment. The signals from
the unit may disrupt the operation of said
equipment.
•Do not remain in contact with the
device for long periods while it is turned
on. Doing so may lead to injury,
including low temperature burns, due to
the heat from the unit.
Do not place objects on this
unit.
Do not place any objects on top of this unit.
Do not attach this unit to the wall or ceiling.
It may fall off and cause injury.
Do not obstruct the ventilation
holes.
Do not use this unit on shaggy rugs, beds,
sofas, etc., or wrapped in cloth, etc. Doing
so will prevent the heat from dispersing,
leading to damage.
Do not expose to heat.
Do not place this unit on top of an amplifier
or other components that generate heat.
When rack mounting it, to avoid the heat
given off by the amplifier or other audio
components, place it on a shelf below the
amplifier.
Turn off the power of this unit
when not using it.
Depending on signal conditions, striped
patterns may appear on a TV screen and
noise may enter the sound of radio
broadcasts when the power of this unit is
on. If this happens, turn off the power of this
unit.
27
En