Panasonic Technics SU-R1000 Mode D'emploi page 28

Others
Specifications
■
GENERAL
Power supply
Power
consumption
Power
consumption in
standby mode
Dimensions
(W×H×D)
Mass
Operating
temperature range
Operating humidity
range
■
AMPLIFIER SECTION
Output power
Load impedance
Frequency
response
PHONO (MM)
LINE
DIGITAL IN
Input sensitivity/
Input impedance
PHONO (MM)
PHONO (MC)
LINE
■
Format support
This unit supports the following formats.
• Playback of all formats supported by this unit is not guaranteed.
• Playback of a format not supported by this unit may cause choppy audio or noise. In such cases, check to
see if this unit supports the format.
• File information (sampling frequency, etc.) shown by this unit and playback software may differ from each
other.
28
(28)
AC 220 V to 240 V,
50/60 Hz
220 W
Approx. 0.3 W
430 mm × 191 mm ×
459 mm
Approx. 22.8 kg
0 °C to 40 °C
35 % to 80 % RH
(no condensation)
150 W + 150 W
(1 kHz, T.H.D. 0.5 %, 8 ,
20 kHz LPF)
300 W + 300 W
(1 kHz, T.H.D. 0.5 %, 4 ,
20 kHz LPF)
4  - 16 
20 Hz to 20 kHz
(RIAA DEVIATION ±1 dB,
8 )
5 Hz to 80 kHz
(-3 dB, 8 )
5 Hz to 80 kHz
(-3 dB, 8 )
2.5 mV / 47 k
300 mV / 100 k
200 mV / 22 k
■
TERMINALS SECTION
Stereo, 6.3 mm
Headphones Jack
0.75 mW, 32 
REAR USB
PC
Type B Connector ×2
Analogue input
LINE ×2 Pin jack
LINE XLR
3-pin XLR
BALANCED
PHONO
Pin jack
(MM/MC)
PHONO XLR
BALANCED 3-pin XLR
(MC)
MAIN IN Pin jack
REC IN Pin jack
Digital input
Optical digital
Optical terminal
input ×2
Coaxial digital
Pin jack
input ×2
Format support LPCM
Analogue output
REC OUT Pin jack
PRE OUT Pin jack
System port
  3.5 mm, Jack
System control
■
FORMAT SECTION
USB-B
USB 2.0 High-speed
USB Standard
USB Audio Class 2.0,
Asynchronous mode
ASIO Native mode,
DSD control mode
DoP mode