Chapter 10 Check To Be Made Before Startup; Chapter 11 Starting And Stopping; Chapter 12 Correct Use And Advice - Columbus KS 51 BM 45 Mode D'emploi

Vacuum Sweeper Vacuum Sweeper Vacuum Sweeper
KS 51|BM 45 – KS 71|BM 60 KS 51|BM 45 KS 71|BM 60
Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks. Do not smoke or go near a naked flame or any other apparatus that can produce sparks.
Make sure that all the connections (wiring terminals, plugs, sockets etc.) are tigh fitting and efficient. Make sure that all the connections (wiring termi Make sure that all the connections (wiring termi Make sure that all the connections (wiring termi
Do not rest tools or metallic objects on top of the batteries. Do not rest tools or metallic objects on top of the batteries. Do not rest tools or metallic objects on top of the batteries. Do not rest tools or metallic objects on top of the batteries. Do not rest tools or metallic objects on top of the batteries.
Avoid overloads and keep the temperature of the batteries below 45 Avoid overloads and keep the temperature of the batteries below 45 Avoid overloads and keep the temperature of the batteries below 45 Avoid overloads and keep the temperature of the batteries below 45 Avoid overloads and keep the temperature of the batteries below 45-50° C. Avoid overloads and keep the temperature of the batteries below 45
Top up with distilled water whenever the level of the elect Top up with distilled water whenever the level of the elect Top up with distilled water whenever the level of the elect Top up with distilled water whenever the level of the elect Top up with distilled water whenever the level of the electrolyte goes below 5
Keep any centralised filling systems clean and efficient. Keep any centralised filling systems clean and efficient. Keep any centralised filling systems clean and efficient. Keep any centralised filling systems clean and efficient. Keep any centralised filling systems clean and efficient.
Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery. Do not move the machine manually or start it up for any reason while recharging the battery.
CHAPTER 10 CHAPTER 10 – CHECKS PRIOR TO STARTING UP CHECKS PRIOR TO STARTING UP CHECKS PRIOR TO STARTING UP CHECKS PRIOR TO STARTING UP
Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows: Check if the battery contains the sulphuric acid solution and if it is charged. If not, proceed as follows:
Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with filling the elements with the sulphuric acid Carefully read the chapter "Safety rules and regulations", which specifies the risks involved with fi
Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptab Acquire the following instruments and personal protections: Safety glasses, protective gloves, 1 pair of scissors, 1 receptable for the transfer
Use the scissors to cut off the Use the scissors to cut off the Use the scissors to cut off the end of the plastic container holding the sulphuric acid solution and pour it into the transfer container.
Remove the cap to the chambers of the battery elements. Remove the cap to the chambers of the battery elements. Remove the cap to the chambers of the battery elements. Remove the cap to the chambers of the battery elements. Remove the cap to the chambers of the battery elements.
With the aid of the funnel, pour in the solution until it reaches the level shown on the outside of the battery. With the aid of the funnel, pour in the solution until it reaches the level shown on the out With the aid of the funnel, pour in the solution until it reaches the level shown on the out With the aid of the funnel, pour in the solution until it reaches the level shown on the out With the aid of the funnel, pour in the solution until it reaches the level shown on the out With the aid of the funnel, pour in the solution until it reaches the level shown on the out With the aid of the funnel, pour in the solution until it reaches the level shown on the out
Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the various Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v Wait at least 12 hours leaving the battery inactive and then, if necessary, top up the solution bringing the levels, of the v
elements to the same conditions. elements to the same conditions. elements to the same conditions.
Carefully read, in the chapter "Safety rules and regulations", the ris Carefully read, in the chapter "Safety rules and regulations", the ris Carefully read, in the chapter "Safety rules and regulations", the ris Carefully read, in the chapter "Safety rules and regulations", the ris Carefully read, in the chapter "Safety rules and regulations", the risks involved in charging or discharging the battery.
Charge the battery. Charge the battery.
CHAPTER 11 – STARTING AND STOPPING CHAPTER 11 STARTING AND STOPPING STARTING AND STOPPING
___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________
BEFORE STARTING THE MACHINE, IT IS INDISPENS
___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________
START:
1 - Turn the key in the clockwise direction Detail 3 Fig. 6 Turn the key in the clockwise direction Turn the key in the clockwise direction Turn the key in the clockwise direction
STOP:
1 - Turn the key in the anticlockwise d Turn the key in the anticlockwise d Turn the key in the anticlockwise direction,
CHAPTER 12 – CORRECT USE AND ADVICE CHAPTER 12 CORRECT USE AND ADVICE CORRECT USE AND ADVICE
IMPORTANT: IMPORTANT: Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, rags, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal, Before starting the job, make sure that the surface to be swept is free of objects such as ropes, strips of plastic or metal,
stick, stick, live electric cables live electric cables or other similar art or other similar articles. If such object are present,
live electric cables, risks of electrocution. live electric cables, risks of electrocution. live electric cables, risks of electrocution. live electric cables, risks of electrocution.
Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central bru Crossing over rails, small steps or guides which stick up from the floor can damage the flaps on the central brush vacuum chamber; this being
one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the moment of crossing by one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen one of the most frequent causes of damage, if such object have to be crossed, lift the front part of the machine at the momen
pressing down on the handle to gain leverage. pressing down on the handle to gain leverage. pressing down on the handle to gain leverage. pressing down on the handle to gain leverage.
Avoid crossing over wet or particular Avoid crossing over wet or particular Avoid crossing over wet or particular damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing Avoid crossing over wet or particular
stop suction pulling the lever Detail 4 Fig. 6 stop suction pulling the lever stop suction pulling the lever
If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be eliminated, it is advisable to pass over the first time to If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina If the area to be cleaned is very dirty owing to the quantity and quality of the dirt to be elimina
get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean. get rid of the majority of the dirt, then pass over a second time with the waste container and the suction filters clean.
If the machine is used methodically If the machine is used If the machine is used methodically and correctly, it is not necessary to carry o
nals, plugs, sockets etc.) are tigh fitting and efficient. nals, plugs, sockets etc.) are tigh fitting and efficient. nals, plugs, sockets etc.) are tigh fitting and efficient. nals, plugs, sockets etc.) are tigh fitting and efficient.
SPECIFIC CHECK FOR MACHINES POWERED BY BATTERY SPECIFIC CHECK FOR MACHINES POWERED BY BATTERY CHECK FOR MACHINES POWERED BY BATTERY CHECK FOR MACHINES POWERED BY BATTERY
end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container. end of the plastic container holding the sulphuric acid solution and pour it into the transfer container.
STARTING THE MACHINE, IT IS INDISPENS STARTING THE MACHINE, IT IS INDISPENS STARTING THE MACHINE, IT IS INDISPENSABLE TO HAVE READ THE PREVIOUS CHAPTERS.
Detail 3 Fig. 6.
irection, Detail 3 Fig. 6 Detail 3 Fig. 6.
icles. If such object are present, icles. If such object are present, icles. If such object are present, remove them
damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing damp surfaces in order to avoid damage to the paper filters. In cases of strict necessity, before crossing
Detail 4 Fig. 6.
and correctly, it is not necessary to carry o and correctly, it is not necessary to carry out multiple passes. and correctly, it is not necessary to carry o
rolyte goes below 5-10 mm from the splash guard. 10 mm from the splash guard. 10 mm from the splash guard.
solution solution
(clean), 1 funnel (clean). (clean), 1 funnel (clean). (clean), 1 funnel (clean).
ks involved in charging or discharging the battery. ks involved in charging or discharging the battery. ks involved in charging or discharging the battery. ks involved in charging or discharging the battery.
ABLE TO HAVE READ THE PREVIOUS CHAPTERS. ABLE TO HAVE READ THE PREVIOUS CHAPTERS. ABLE TO HAVE READ THE PREVIOUS CHAPTERS.
remove them to avoid damage to the machine or, in the case of
ut multiple passes.
24
lling the elements with the sulphuric acid lling the elements with the sulphuric acid lling the elements with the sulphuric acid
side of the battery.
to avoid damage to the machine or, in the case of to avoid damage to the machine or, in the case of to avoid damage to the machine or, in the case of
sh vacuum chamber; this being sh vacuum chamber; this being
ted, it is advisable to pass over the first time to ted, it is advisable to pass over the first time to ted, it is advisable to pass over the first time to
le for the transfer
t of crossing by