Chapter 1 General Information; Chapter 2 Purposes / Intended Use; Chapter 3 Preparation (Unpacking) - Columbus KS 51 BM 45 Mode D'emploi

Balayeuse aspirante et accessories

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Vacuum Sweeper

KS 51|BM 45 – KS 71|BM 60

KS 51|BM 45

KS 71|BM 60

________________________________________________________________________________________

BEFORE USING THE MACHINE, READ THIS INSTRUCTION MANUAL CAREFULLY

_________________________________________________________________________________________

„columbus"

„columbus" DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS

DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS

DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS RESULTING FROM FAILURE TO COMPLY

DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS

WITH THE INSTRUCTIONS IN THIS MANUAL AND FROM INCORRECT AND / OR IMPROPER MACHINE USE.

ALL THE EQUIPMENT NEEDED FOR PERSONAL PROTECTION (GLOVES, MASKS, WHITE-LENS GLASSES, KEYS, TOOLS, ETC.) MUST

ALL THE EQUIPMENT NEEDED FOR PERSONAL PROTECTION (GLOVES, MASKS, WHITE

ALWAYS KEEP THIS MANUAL HANDY FOR QUICK REFERENCE (IN CASE OF LOSS, ASK YOUR DEALER FOR ANOTHER COPY)

„columbus" RESERVES THE RIGHT TO MAKE CHANGES

RESERVES THE RIGHT TO MAKE CHANGES

RESERVES THE RIGHT TO MAKE CHANGES OR UPGRADE ITS MACHINES, WITHOUT ANY OBLIGATION TO UPGRADE

As per directive EC, every machine is supplied with a manual for its use and maintenance. Should this documentation result missing, the user is

As per directive EC, every machine is supplied with a ma

kindly requested to order it.

Every machine is accompanied by the following documentation:

- Handbook for use and maintenance

Handbook for use and maintenance

- Declaration of conformity to directive

Declaration of conformity to directive

Declaration of conformity to directive EC.

Declaration of conformity to directive

With the aim of using the machine correctly and with maximum safety, the user must carefully read this entire manual, paying

With the aim of using the machine correctly and with maximum safety, the user must carefully read this entire manual, paying particular

With the aim of using the machine correctly and with maximum safety, the user must carefully read this entire manual, paying

attention to the sections regarding potential risks, safety regulations and emergency operations.

All the articles for the personal protection of the operator, specifically indicated in the manual, (gloves, masks, glasses, etc.) must be supp

All the articles f

or the personal protection of the operator, specifically indicated in the manual, (gloves, masks, glasses, etc.) must be supp

or the personal protection of the operator, specifically indicated in the manual, (gloves, masks, glasses, etc.) must be supplied

or the personal protection of the operator, specifically indicated in the manual, (gloves, masks, glasses, etc.) must be supp

by the user. The terms front, rear, left and right used in this publication always refer to the driving position occupied by

by the user. The terms front, rear, left and right used in this publication always refer to the driving position occupied by the operator.

by the user. The terms front, rear, left and right used in this publication always refer to the driving position occupied by

To assure the longest possible life of the machine parts, the instructions in this handbook must be followed closely and only

To assure the longest possible life of the machine parts, the instructions in this handbook must be followed closely and only original spare parts

To assure the longest possible life of the machine parts, the instructions in this handbook must be followed closely and only

must be used. Data contained in this documents are liable to change since the Manufacturer reser

must be used. Data contained in this documents are liable to change since the Manufacturer reserved the right, in any given moment, to make

must be used. Data contained in this documents are liable to change since the Manufacturer reser

modifications with the aim of improving the machines.

UNPACKING:

Having eliminated the outer packaging, free the machine from the pallet as follows:

Release the front wheel brake

Remove the sticky tape Detail C blocking the handlebar

Remove the sticky tape

Open the waste container Detail A and pull out the two handlebar supports

Open the waste container

Screw the handlebar supports Part. B

Screw the handlebar supports

Screw the ends of the handle into the holes

Screw the ends of the handle into

Take the machine off the pallet: according to the machine weight, written on the CE label, this can be done in different ways

Take the machine off the pallet: according to the machine weight, written on the CE label, this can be done in different ways:

Take the machine off the pallet: according to the machine weight, written on the CE label, this can be done in different ways

Check the weight in kilograms on the CE plate and with the help of one

Check the weight in kilograms on the CE plate and with the help of one or more persons, wearing protective gloves, lift the machine

Check the weight in kilograms on the CE plate and with the help of one

by gripping the handle and under the front plastic cover and place it on the ground, being careful to not damage the flaps.

by gripping the handle and under the front plastic cover and place it on the ground, being careful to not damage the flaps. With the

PROVIDED BY THE USER. FOR EASIER READING, REFER TO THE CONTENTS PAGE.

PREVIOUSLY- SOLD MACHINES.

PREVIOUSLY

ALL „columbus"

ALL

„columbus" SWEEPERS CONFORM TO EEC STANDARDS AND ARE LABELLED:

SWEEPERS CONFORM TO EEC STANDARDS AND ARE LABELLED:

nual for its use and maintenance. Should this documentation result missing, the user is

blocking the handlebar

and pull out the two handlebar supports Detail B Fig.1

and pull out the two handlebar supports

Part. B into the holes

into the holes Part. E Fig. 1

the holes Detail D

Detail D on the supports as shown in

OR UPGRADE ITS MACHINES, WITHOUT ANY OBLIGATION TO UPGRADE

SOLD MACHINES.

Detail B Fig.1

on the supports as shown in Fig.1/B

or more persons, wearing protective gloves, lift the machine

CHAPTER 1

CHAPTER 1 – GENERAL INFORMATION

GENERAL INFORMATION

RESULTING FROM FAILURE TO COMPLY

LENS GLASSES, KEYS, TOOLS, ETC.) MUST BE

LENS GLASSES, KEYS, TOOLS, ETC.) MUST

CHAPTER 2

CHAPTER 2 – PURPOSE OF THE SWEEPER

PURPOSE OF THE SWEEPER

ved the right, in any given moment, to make

CHAPTER 3 - PREPARATION

CHAPTER 3

Fig.1/B

particular

he operator.

original spare parts

PREPARATION

With the

Table des Matières

Ce manuel est également adapté pour:

Ks 71 bm 60

Chapter 1 General Information; Chapter 2 Purposes / Intended Use; Chapter 3 Preparation (Unpacking) - Columbus KS 51 BM 45 Mode D'emploi

Les langues disponibles

Manuels Connexes pour Columbus KS 51 BM 45

Contenu connexe pour Columbus KS 51 BM 45

Ce manuel est également adapté pour:

Table des Matières