Publicité
3. Installing the Belt Clip
For handy carry your radio, a belt clip is supplied whit your radio allows
you to attach the radio to your belt.
To installing the belt clip:
Installing the belt clip to the back of your radio, make sure that the
fitting Groove is aligned.
USING YOUR RADIO
You should familiar with several operating procedures:
1. Turning the power on.
2. Adjusting Squelch.
3. Transmitting and receiving.
4. Accessing the priority channel16.
5. Selecting channels.
6. Selecting high/low power.
7. Locking the keypad.
8. Adding channels to memory.
9. Scanning channels.
10. Accessing channels saved to memory.
11. Using the monitor modes.
12. Programming the ATIS ID code.
13. Resetting the radio
7 EN
10. Accessing Channels Saved to Memory
Once channels have been saved, you can easily access them by
pressing the MEM key.
In Memory mode, only the channels saved in memory can be
accessible using the Up or Down Channel keys.
To access saved channels:
1. Press the MEM key. The Stored and "M " icons will appear on
the LCD to indicate that you are in Memory mode.
▲
▼
2. Use the [
] or [
] (Up/Down) keys to scan through the
saved channels.
3. Press the MEM key again to regain access to all channels.
11. Using the Watch Monitor Modes
The radio is equipped with two types of monitor modes: Dual Watch
and Tri Watch.
Dual Watch monitors the current working channel and Channel 16
alternately.
To activate and terminate Dual Watch mode:
1. Press and release DW/TRI Watch key to activate the Dual
Watch mode. The DU icon will appear on the LCD display.
2. Press and release DW/TRI Watch key again to terminate
Dual Watch mode and return to the previous working channel.
or...
3. Press and hold DW/TRI Watch key for 3 seconds to
terminate Dual Watch mode and enter into Tri Watch mode. The
TRI icon will appear on the LCD display.
NOTE: During Dual Watch mode, SCAN, MEM, BAND, and [
(Up/Down) keys are inactive and will sound an error beep if pressed.
Tri Watch monitors Channel 16, Channel 9 and the current working
channels.
To activate and terminate Tri Watch mode:
▲
▼
] or [
]
12 EN
Publicité
Chapitres
