Télécharger Imprimer la page

Installing The Antenna - NAVICOM RT-320 Manuel D'utilisation

Masquer les pouces Voir aussi pour RT-320:

Publicité

1. Press and hold DW/TRI Watch key for 3 seconds to activate
the Tri Watch mode. The TRI icon will appear on the LCD display.
2. Press and hold DW/TRI Watch key again for 3 seconds to
terminate Tri Watch Mode and to return to the previous working
channel.
or...
3. Press and release DW/TRI Watch key to terminate Tri Watch
mode and enter into Dual Watch mode. The DU icon will appear
on the LCD display.
NOTE: During Tri Watch mode, SCAN, MEM, BAND and [
(Up/Down) keys are inactive and will sound an error beep when
pressed.
12. Programming the ATIS ID code
The Automatic Transmission Identification System (ATIS) is used in
some European countries to identify vessels in their inland waterways.
After the PTT key is released following a transmission, the vessel's
ATIS ID number is also transmitted.
To program the ATIS ID number:
1. With the radio powered off, simultaneously press and hold
HI/LOW/LOCK key and BAND key together.
2. While still pressing the two keys, turn on the radio.
3. Use
or
(Up/Down) key to change the first digit to the
correct value for your particular ATIS ID.
4. When the correct value is flashing, press SCAN key for 3
seconds to confirm the selection.
5. Press
or
(Up/Down) key to change the second digit to
the correct value.
6. Continue this process until all nine ATIS numbers have been
entered.
7. You must now re-enter the ATIS ID a second time to confirm.
8. Store the ATIS ID permanently into the radio by turning the
radio off.
13 EN
You should charge the battery pack for about 3.5hours.
Attach the battery pack to the radio when it is finished charging.
] or [
]
CAUTION:
Remember to take the radio/battery pack out of the charger when it has
been fully charged. Overcharging batteries may result in damage to both
the battery pack and radio.

2. Installing the Antenna

You will need to make sure that the flexible antenna is attached to the
radio.
Installing the antenna:
Rotate the antenna clockwise to fasten securely to the threaded
connector on the top of the radio.
NOTE :
Do not operate the radio or press PTT key without an antenna installed.
6 EN

Publicité

Chapitres

loading